Dental Wireless LED Curing Light Dental Equipment Multiple Curing Time Options with 7 Tips

Product Description

Resin Light Curing Dental Equipment Dental Wireless LED Curing Light Multiple curing time options With 7 Tips
 

pecification:
Input voltage	AC100-240V 50/60Hz
Output voltage	DC5V 1.0A
Battery Type	rechargeable lithium battery
Wave length	385~515mm
Temperature range	5~40ºC
Relative humidity range	≤80%
Air pressure range	75kPa~106kPa
Voltage	DC 3.7V

Product sellpoints:

A. This Dental LED Curing Light comes with 7 lenses to achieve various functions.
B. Endo Guide Lens 2/Point Cure Lens/Endo Guide Lens 1/Trans Lume Lens(Orange)/Proxi Cure ball Lens/Trans Lume Lens(Green)/Proxi Cure ball Lens.
C. The Dentistry Photopolymer Lamp has two modes(Super power mode/.Normal mode) and six selectable times (1s/3s/5s/10s/20s/30s)
D. Easy to operate, with two buttons to distinguish mode and time based on the light source.
E. Intelligent use, the device will automatically shut down after 60 seconds without any operation to achieve energy-saving effect. An alarm will be issued to remind you to charge before the power is depleted.

Feature:

1. This product is a new type curing light that uses high power and high purity broad spectrum blue-violet LED with a wavelength
of 385-515nm as light source and an enhanced condenser lens.it is suitable for most composite resins on the market.
2. This curing light has 2 working modes for users to use in different working environments.The working head can be rotated 360
degrees for easy operation.
3. Lens instructions
(1) Point-like Lens
Clear lens for pinpoint curing of small composites or tack curing veneers.
(2) Inspection Lens(Green)
aids in detection of cracks and defects in a tooth or prostheses.
(3) Inspection Lens(Orange)
The penetrating ability of the orange lens shows the obstruction to light caused by posts or internal bubbles.
(4) Ball Lens
(5) Ball Lens
holds matrix against contact while curing composite for Class II restorations
(6)Endotreat Lens1
(7)Endotreat Lens2
This special lens is helpful for curing apical retrofills and other narrow preparations.

MODE 1:

Normal mode(green indicator light)
The curing light work with standard power, and the time can be set to 10 seconds,20 seconds and 30 seconds.

Mode 2:

Constant power mode(blue indicator light)
The curing light works with super power, and the time can be set to 1 second,3 seconds and 5 seconds.

DETAILED OPERATION:

Step 1:PRESS any button to wake up the circuit and enter the standby state.
Step 2:Long press the (M/T) button to choose the required working mode.
Step 3:After selecting the working mode, short press the (M/T) button to select the required working time.
Step 4:After setting the working mode and time, press the switch button to turn on the device.

LED CURING LIGHT:

1 sec light curing wide spectrum curing light

Packing list:

1.Curing light body------1pcs
2.Working head------1pcs
3.Charging base------1pcs
4.Filter cover------1pcs
5.User manual------1pcs
6.Certificate------1pcs
7.Power adapter------1pcs
8.Disposable sleeve------1bag(50pcs)

 

7 PCS Magnetic Point Cure Lens

Endotreat lens

This special lens is helpful for curing apical retrofills and other narrow preparations.

Ball lens

Holds matrix against contact while curing composite for Class Il.

Point-like lens

Clear lens for pinpoint curing of small composites or tackcuring veneers.

Inspection lens(green)

Aids in detection of cracks and defectsin a tooth or prostheses.

Inspection lens(orange)

The penetrating ability of the orange lensshows the obstruction to light caused byposts or internal bubbles.

 

MULTI-FUNCTION NEEDLE

FIXED POINT CURING

ADVICE TO MEET YOUR NEEDS

Magnetic suction type Lens

Installation and disassembly are more convenient